LandscapingBrisbane

Fencing Cost Brisbane

Fencing is one of the most common property improvements in Brisbane. Whether you need a Colorbond boundary fence, a timber privacy screen, or compliant pool fencing, expect to pay $75 to $400 per lineal metre depending on the material and type.

Fencing Costs by Type

Fence TypeCost/m
Colorbond (1.8m)$75 – $120/m
Treated pine paling$80 – $120/m
Hardwood timber$120 – $150/m
Aluminium slat$100 – $250/m
Pool fencing (glass)$300 – $400/m
Pool fencing (aluminium)$200 – $300/m
Chain link$40 – $80/m
Retaining wall + fence combo$250 – $500/m

Prices are indicative only and based on Brisbane metro market rates as of 2025. Actual costs vary by site slope, access, soil conditions, and old fence removal. Always obtain written quotes.

Brisbane-Specific Considerations

Sloped blocks are common across Brisbane suburbs like Paddington, Ashgrove, and Camp Hill. Fencing on slopes requires stepped or raked panels, which adds to both material and labour costs. Stepped Colorbond fencing on a steep slope can cost 20 to 30 percent more than flat ground.

Pool fencing compliance is strictly enforced in Queensland. All pool fences must comply with AS1926.1, with specific requirements for gate operation, climbable zones, and gap dimensions. Non-compliant fencing can result in fines and will delay property sales.

Termite considerations: Brisbane is a high termite risk area. If choosing timber fencing, treated pine or naturally durable hardwoods are essential. Colorbond and aluminium fencing eliminates termite risk entirely, which is one reason for their popularity in South-East Queensland.

Related Guides

Fencing ServicesRetaining Wall CostLandscaping CostFind a Landscaper

Frequently Asked Questions

Colorbond fencing in Brisbane costs between $75 and $120 per lineal metre for a standard 1.8 metre high fence, supplied and installed. This includes posts, rails, sheets, and concrete footings. Costs increase for sloped sites, difficult access, or premium Colorbond colours. A typical 30 metre boundary fence would cost approximately $2,250 to $3,600.
Chain link fencing is the cheapest option at $40 to $80 per lineal metre installed. For privacy fencing, treated pine paling is the most affordable at $80 to $120 per lineal metre. While cheaper upfront, timber fencing requires staining or painting every few years, whereas Colorbond is virtually maintenance-free.
Standard boundary fences up to 2 metres high generally do not require council approval in Brisbane. However, pool fencing must comply with the Queensland Building Act and Australian Standard AS1926.1 and requires a compliance certificate. Fences on flood-prone properties or near heritage overlays may require additional approvals.
In Queensland, boundary fencing costs are typically shared equally between neighbouring property owners under the Neighbourhood Disputes (Dividing Fences and Trees) Act 2011. This applies to a standard adequate fence. If one owner wants a more expensive fence than what is considered adequate, they pay the difference.
A standard Colorbond or timber fence around a residential property typically takes 1 to 3 days to install depending on the length and terrain. Pool fencing can take 1 to 2 days. Factors that extend the timeline include sloped sites, rock encountered when digging post holes, and removal of existing fencing.

Get Fencing Quotes

We connect you with qualified fencing contractors in Brisbane. Get up to 3 free quotes — no obligation.

Get Free Quotes
Get Free Quotes

Sarah from Paddington just requested landscaping quotes