LandscapingBrisbane

Paving Cost Brisbane

Paving transforms driveways, patios, paths, and pool surrounds. Brisbane homeowners typically pay $60 to $200 per square metre installed, depending on the material chosen and the complexity of the layout.

Paving Costs by Material

MaterialCost/m²
Concrete pavers (standard)$60 – $100/m²
Concrete pavers (premium)$90 – $130/m²
Exposed aggregate concrete$80 – $140/m²
Natural stone (sandstone)$120 – $180/m²
Natural stone (granite)$140 – $200/m²
Bluestone$130 – $190/m²
Porcelain pavers$100 – $180/m²
Clay brick pavers$80 – $120/m²

Prices are indicative only and based on Brisbane metro market rates as of 2025. Includes supply, base preparation, laying, and jointing. Actual costs vary by site conditions and access.

Brisbane-Specific Considerations

Brisbane's reactive clay soil is the single biggest factor affecting paving longevity. Without a properly compacted road base of at least 100mm, pavers will shift, sink, and become uneven within a few years as the clay swells and contracts with moisture cycles. A qualified paving contractor will always prepare a solid base before laying.

Heavy summer rainfall in Brisbane means stormwater management is essential for any paved area. Driveways need correct crossfall to shed water, patios require drainage channels, and pool surrounds need non-slip surfaces rated for wet conditions. All paving should drain away from buildings and boundaries.

Brisbane's intense UV causes some paver colours to fade over time. Choosing UV-stable products or natural stone ensures your paving looks great for decades, not just the first few years.

Related Guides

Concrete Driveway CostLandscaping CostFind a Landscaper

Frequently Asked Questions

A standard double driveway (approximately 40–60m²) in Brisbane costs $3,000 to $8,000 using concrete pavers, or $5,000 to $12,000 using natural stone. Exposed aggregate concrete driveways sit in the middle at $3,500 to $8,500. Costs include excavation, compacted base, sand bed, paving, and jointing.
Standard concrete pavers are the most affordable paving option at $60 to $100 per square metre installed. They come in a wide range of colours and patterns and perform well in Brisbane’s climate. For even lower cost, plain concrete starts from $50 per square metre but lacks the visual appeal of pavers.
Quality paving installed on a properly compacted base lasts 20 to 30 years or more in Brisbane. The critical factor is base preparation — Brisbane’s clay soil requires a minimum 100mm compacted road base to prevent subsidence. Natural stone and quality concrete pavers are both extremely durable in our subtropical climate.
Natural stone creates a premium look and typically lasts longer than concrete pavers. It also handles Brisbane’s UV exposure without fading. However, it costs roughly twice as much as concrete pavers. For high-visibility areas like entertaining patios and pool surrounds, many homeowners consider natural stone worthwhile.
Yes. Proper drainage is critical when paving over Brisbane’s clay soil. Without adequate fall and drainage channels, water pools on the surface or saturates the base, causing pavers to shift and sink. A qualified paver will ensure correct falls, drainage outlets, and base preparation for our soil conditions.

Get Paving Quotes in Brisbane

We connect you with qualified paving contractors across Brisbane. Up to 3 free quotes, no obligation.

Get Free Quotes
Get Free Quotes

Sarah from Paddington just requested landscaping quotes