LandscapingBrisbane

Concrete Driveway Cost Brisbane

A new concrete driveway is one of the best investments for your Brisbane property, adding both functionality and street appeal. Expect to pay $65 to $150 per square metre depending on the finish, with exposed aggregate being the most popular choice.

Concrete Driveway Costs by Finish

Finish TypeCost/m²
Plain (broom finish)$65 – $85/m²
Coloured concrete$75 – $100/m²
Exposed aggregate$80 – $120/m²
Stamped (patterned)$100 – $150/m²
Polished concrete$100 – $140/m²
Stencilled concrete$85 – $120/m²

Prices are indicative only and based on Brisbane metro market rates as of 2025. Actual costs vary by driveway size, site preparation, slope, and access. Always obtain written quotes.

Additional Cost Factors

Demolition and removal of an existing driveway adds $15 to $30 per square metre to the total cost. Old concrete must be broken up, loaded, and disposed of at a licensed facility. If your existing driveway is in reasonable condition, some contractors may pour over the top, saving on demolition costs.

Subbase preparationis critical in Brisbane's clay soils. Inadequate subbase is the leading cause of driveway cracking and failure. A proper subbase includes excavation to depth, compacted road base material, and a moisture barrier. This typically adds $10 to $20 per square metre but is essential for longevity.

Drainage and crossover works may be required if your property has stormwater management needs or if the council verge needs a new crossover. Council crossover permits in Brisbane typically cost $200 to $500 depending on the scope of work.

Related Guides

Concrete Driveway ServicesPaving CostLandscaping CostPressure WashingFind a Landscaper

Frequently Asked Questions

A concrete driveway in Brisbane costs between $65 and $150 per square metre depending on the finish type. A standard two-car driveway of approximately 40 to 50 square metres would cost $2,600 to $7,500 installed. Plain broom-finish concrete is the most affordable, while stamped and polished finishes command premium pricing.
Exposed aggregate is the most popular driveway finish in Brisbane. It provides excellent grip in wet conditions, which is important during subtropical rain, and hides minor stains and imperfections better than plain concrete. It also complements most Brisbane home styles and ages gracefully over time.
A well-constructed concrete driveway in Brisbane will last 25 to 30 years or more with proper maintenance. Key factors include correct subbase preparation, adequate thickness of at least 100mm for residential use, control joints to manage cracking, and regular sealing to protect against moisture and UV exposure.
In most cases, replacing or installing a driveway on your property does not require building approval. However, any work that affects the council verge or crossover where your driveway meets the street requires a crossover permit from Brisbane City Council. Your concreter should be able to advise on permit requirements.
You should wait at least 7 days before driving a car on a new concrete driveway and at least 28 days before parking heavy vehicles or trailers. Concrete reaches approximately 70 percent of its strength in the first 7 days but continues to cure and strengthen over 28 days. Walking on the driveway is usually safe after 24 to 48 hours.

Get Concrete Driveway Quotes

We connect you with qualified concreters in Brisbane. Get up to 3 free quotes — no obligation.

Get Free Quotes
Get Free Quotes

Sarah from Paddington just requested landscaping quotes